Striped Bass Fishing Forums Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 17 Results
  1. The Striper Forum
    Yeah I know, Whats he talking about? well here it is, I"ve heard of a few people talk about it , and the general thought was that-no, no way, the stripers just gonna mangle them up, and that's true. First off most spinner baits are made for bass,pike etc.. Big ones are 1/2oz. to 1oz. and are...
  2. Buy - Sell - Trade
    anyone have a cheap plug spinner to help a new guy out, cant spend to much.. not sure what style i would need or is best but open to ideas. let me know, located on cape cod and dont mind a short travel if worth it.. thanks for the help.
  3. Plugs and Plug Building
    This is my first spinner can get to all points of the plug w/ease.Easy to chase the air bubbles around the eyes when rotating.Thats another thread.I'm in the process of building a remoovable booth to slide down over the wire so i can epoxy then slide windowed heated booth down over the...
  4. Plugs and Plug Building
    I was wondering what a good speed for spinning after applying epoxy(etex). I'm getting ready to build a spinner right now and have a few gear motors I can use. The one I'm thinking of using spins at around 2 or 3 rpm and is from the feed auger of my pellet stove. I have a few of these so they...
  5. Plugs and Plug Building
    This one should do it. 160:1 reduction. :yay: I should be able to spin about 1000 at a time with this baby.:lff3:
  6. Buy - Sell - Trade
    In perfect working order. Probably from the early 60's . All I'm asking is $40.00 shipped . Will post pics if any interest . Hate to get rid of this one but have to make room for a new custom rod . Thanks .
  7. Plugs and Plug Building
    Well here they are my first batch of epoxied Roccus Danny's. I had a couple of small specks in the epoxy nothing the fish will notice. But I am pretty pleased at my first attempt. I got my air brush last thursday what a difference in finish. Wow. Tons of fun.
  8. Plugs and Plug Building
    Giant pikies, darters, a pencil , spook and a swimming popper, as well as a slophead and a few surfsters...
  9. Plugs and Plug Building
    The 2008 modelis up and running.. unlike my first one which was a Fred Sanford/McGyver special... I spent some$$$$ on this one... The box: 25 1/2" X 31 1/2" made of 3/4" MDF... Power: a 3 watt 2.5 RPM rotissery gear motor provides the power to the drive shaft, I turned the original square...
  10. Plugs and Plug Building
    the danny type is 7' 2oz the little guy is 4" 1 1/4oz
  11. Plugs and Plug Building
    After seeing these nice spinners, I had to make one. I'll admit that I just about copied the Roccus design. I hope Roc doesn't mind.:cheers: Here it is. I used some plugs ready for primer and paint as my test samples. Don't ya love belts and pulleys. I needed them to get to 8 RPM. An...
  12. Plugs and Plug Building
    some top water stuff..a mixed bag.
  13. Plugs and Plug Building
    Here's a look at the first batch off the spinner, 5 of my own and a repaint of my favorite surfster, which I used to make a drawing, and now I have a whole school of surfsters in process, 15 of them or so.....the pencils are Gibbs knockoffs, they work great, so why change anything? Biggest fish...
  14. Plugs and Plug Building
    I just messed up 5 plugs last night because the nut holding on the end of the eye bolt and spring came off about an hour after I went to bed. I went down this morning and saw four plugs stuck to the bench and the other one stuck to the floor. when I pried them off they were missing a little...
  15. Saltwater Tackle Shop
    I am looking to buy 2 new spinners but I am not sure what to get. I plan on using them for stripers and fluke. I figured I would get 1 for 15lb line and 1 for 20. I was going to get penn spinfishers 650ss and 750ss but before I spend 250 I am curious to know what you guys think is a good...
  16. Freshwater Tackle Box
    I have been out of the fishing scene for quite a while and I was wondering if I could get some advice. I currently use 2 ABU Garcia Ambassador bait reels for Striper/the like. I would like to get a good spinning rig. What is a good Mid-Range spinning reel? I have a couple of ST. Croix rods that...
  17. Sweetwater Fishing -Freshwater Stripers
    I rarely fish spinner baits. Never really developed any confidence with them. But, I was looking through my tackle several days ago and came across a couple of unopenned lures. Must have got them years ago from some Bassmaster promotional. One was a white spinner bait with diamond cut twin...
1-17 of 17 Results