thread finish removal - Stripers247.com Forums
 
Striped Bass Fishing Site Map | Contact Us | Fishing Log Software | Fishing Online | Advertise
to UPLOAD: please register or login

Go Back   Stripers247.com Forums > Equipment & Tackle --- How To / Do It Yourself Forums > Rods And Custom Rod Building
Forgot Password? Register Now!!

Rods And Custom Rod Building Discuss on fishing rods & on custom rod building here. Saltwater and freshwater Rods


Reply
 
Thread Tools
  #1  
Old 05-04-2008, 11:54 AM
nightfishr nightfishr is offline
 
Join Date: Jan 2008
Posts: 20
Default thread finish removal

I stupidly applied flex coat thread finish without backing the top foot holder on the reel seat off and now it is stuck to the threaded area just south of the top cork handle. Tried to hack into it a little with an exacto but its stuck good. Going to use the reel clamp for this season. Anyone know if there is a solvent that will dissolve flex coat? Otherwise is there a way to get the reel seat off? Never had to do this in eight years I have been building.
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old 05-05-2008, 12:11 AM
Wickford Rodworks Wickford Rodworks is offline
 
Join Date: Aug 2007
Posts: 8
Default Re: thread finish removal

There is no solvent that will move it without doing damage to everthing around it. You might try heat. A little shot with a heat gun makes guide wrap removal much easier. If you must remove the seat, lets hope you have at least an eighth inch of seat bushing. Take a dremel with a carbide wheel, make four lengthwise cuts around the seat This is where the eight inch bushing allows you to cut seat and not blank. Apply some heat and pry the four sections from the blank. Go slow and careful with the dremel and heat.
Reply With Quote
Reply

Bookmarks

Tags
finish, removal, thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hello Again Thread Jamie K The Lounge 4 03-28-2008 09:48 PM
clear finish on plugs mully537 Plugs and Plug Building 24 08-28-2007 10:14 PM
Hook removal khary23 The Striper Forum 12 06-14-2007 01:51 AM
Microsofts malicious software removal tool Striperjim Information - Security - Help Center 0 07-02-2005 06:45 PM


All times are GMT -4. The time now is 07:02 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2004 - 2013 Stripers247.com LLC
Affiliated Sites:   Noreast.com   Allcoast.com    2coolfishing.com