adding a drag gasket? - Stripers247.com Forums
 
Striped Bass Fishing Site Map | Contact Us | Fishing Log Software | Fishing Online | Advertise
to UPLOAD: please register or login

Go Back   Stripers247.com Forums > Equipment & Tackle --- How To / Do It Yourself Forums > Reels and Reel Maintenance
Forgot Password? Register Now!!

Reels and Reel Maintenance Reel Maintenance and schematics - Discussion on spinning and conventional fishing reels - teardowns and hard to find parts


Reply
 
Thread Tools
  #1  
Old 11-01-2010, 01:34 PM
jim202000 jim202000 is offline
Striper Hunter
 
Join Date: Apr 2010
Posts: 92
Default adding a drag gasket?

(Sorry this is a double post it is also in Beginners but after some thought I figured this would be a better place for it)

Can I cut and fit some sort of foam or rubber gasket to the top of the Drag housing on a reel that does not have a sealed drag or will that just stress the threads on the drag knob and cause damage? I know it will not be bullet proof but I figure it could be better than nothing. It is a spinning reel ( not sure of the model off hand / Iím at work). It does not get a lot of water in it and I rinse it religiously after every outing. I also oil and grease it often because it is not the greatest reel but I need it to last. The drag washers are a stack of, I think, 4 Steel and 3 felt washers. The last time I took the stack apart to wipe them and oil the felt there was defiantly corrosion on the metal washers. I donít dunk the reel but it does get wet form normal use. Is there any thing that I can do to keep the salt better? I am trying my damnedest to maintain this thing until I can up grade. Any help is greatly appreciated.

peace
Reply With Quote
Sponsored Links
Advertisement
 
Reply

Bookmarks

Tags
adding, drag, gasket

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding a drag gasket? jim202000 Stripers 101 - The Beginners clinic. 3 11-07-2010 08:54 AM
Lamiglass arthur1 Rods And Custom Rod Building 32 04-10-2010 12:46 PM
Battle technique, putting' on the brakes...and wild fights Roccus Stripers 101 - Sticky Threads 31 03-09-2009 08:13 PM
Penn 140 Squidder Drag Problem.. giantsquid2008 Reels and Reel Maintenance 3 01-25-2009 12:29 AM
wife and drag! Dobb The Striper Forum 2 09-01-2005 12:24 PM


All times are GMT -4. The time now is 04:36 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 2004 - 2013 Stripers247.com LLC
Affiliated Sites:   Noreast.com   Allcoast.com    2coolfishing.com