thru wiring plugs
gentlemen,another question regarding something i do that i know theres a better way out there somewhere. i buy pre bent wire at a somewhat local shop with most other of my hardware for plug building. my method has always been to put a wire with anose grommet on and feed the wire thru my swivels and out the back end.then putting on the back grommet. now the caveman part,ive got a vice that i lock a screwdriver in and holding the plug in one hand and the wire thru a pair of pliers in the other. i then pull it around making a loop with a couple of wraps and cutting off excess wire as close as possible. this procedure although it works has cost me some knuckle skin.i wonder how you guys handle this almost last step of plug building?